Máy trám khe nứt Ticab HOT AIR LANCE LANCA GORĄCEGO POWIETRZA HL-1 compresor de aer cal mới
Quan tâm đến quảng cáo?
1/11
Thương hiệu:
Ticab
Mẫu:
HOT AIR LANCE LANCA GORĄCEGO POWIETRZA HL-1 compresor de aer cal
Loại:
máy trám khe nứt
Năm sản xuất:
01/2023
Đăng ký đầu tiên:
2023-01
Khối lượng tịnh:
150 kg
Địa điểm:
Ba Lan Rzeszów
Đặt vào:
hôm qua
Machineryline ID:
ZM26026
Có thể cho thuê:
Mô tả
Các kích thước tổng thể:
1.7 m × 0.75 m × 1 m
Động cơ
Thương hiệu:
Honda
Nguồn điện:
5.15 kW (7 HP)
Nhiên liệu:
xăng
Trục
Tình trạng lốp:
100 %
Tình trạng
Tình trạng:
mới
Kiểm tra kỹ thuật có hiệu lực đến:
2024-01
Bảo hành::
1 năm
Cần giao hàng?
Tính chi phí chuyển hàng
Thêm chi tiết
Màu sắc:
đen
Quan trọng
Chào giá này chỉ mang tính hướng dẫn. Vui lòng yêu cầu thêm thông tin chính xác từ người bán.
Các bí quyết mua hàng
Thông tin liên hệ của người bán
Trade Industrial Company AB
Trong kho:
20 quảng cáo
6 năm tại Machineryline
4.8
5 đánh giá
Số điện thoại đã được kiểm tra
Hot Air Lance HL-1 is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials;
Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials.
Technical specifications:
- Propane gas (consumption 5 kg / h);
- Gas working pressure: 0,2-0,3 bar;
- Gas bottle capacity - 50 l;
- Compressor unit weight - 107 kg;
- Output air temperature: not less than 400 ° C;
- Hot Air Lance weight - 6 kg
- Hot Air Lance length: 1500 mm;
- Wheeled stand weight: 4kg;
- Compressor capacity - 600 l / min;
- Engine power: 7 hp.
La lance thermique HL-1 est une installation autonome mobile pour le nettoyage et le séchage des fissures, joints, creux et clivages dans les revêtements de route goudronnés et bitumés, avant leur remplissage par des matériaux bitumineux ou bitumineux au polymère.
Un flux puissant d’air chaud expulse l’humidité et des grains de raclure, d’herbe, de sol, de poussière, de saleté, de rocaille, etc., en laissant les fissures sèches, propres et prêtes au remplissage par matériaux bitumineux.
PERFORMANCES:
• gaz : propane (débit : 5 kg/heure);
• pression de travail du gaz: 0,2 à 0,3 bars;
• volume de ballon à gaz: 50 littres;
• poids d’installation d’air comprimé : 107 kg;
• température d’air à la sortie: pas moins de 400°С;
• poids de lance thermique: 6 kg;
• longueur de lance thermique: 1500 mm;
• poids du support avec des roues: 4 kg;
• débit du compresseur: 600 litres/min;
• puissance du moteur: 7 CV.
Lanca gorącego powietrza HL-1 to autonomiczna mobilna instalacja do oczyszczania i podgrzewania spękań, szczelin, dziur i wybojów w nawierzchniach asfaltowych i betonowych, przed zalaniem ich materiałami bitumicznymi lub bitumiczno-polimerowymi; Silny strumień gorącego powietrza usuwa wilgoć i cząsteczki gruzu, trawy, gleby, kurzu, brudu, drobnych kamieni itp., pozostawiając spękania suche, czyste i gotowe do wypełnienia materiałami bitumicznymi.
Charakterystyka:
Gaz propan (zużycie gazu: 5 kg / h);
Ciśnienie robocze gazu: 0,2-0,3 bara;
Pojemność butli gazowej: 50 l;
Waga sprężarki: 107 kg;
Temperatura powietrza wylotowego: nie mniej niż 400°С;
Waga lancy: 6 kg;
Długość lancy: 1500 mm;
Waga podpory z kołami: 4 kg;
Wydajność kompresora: 600 l / min;
Moc silnika: 5,8 KM.
Zalety:
• autonomiczna mobilna instalacja;
• oczyszcza i podgrzewa spękania, szczeliny, dziury, wyboje w nawierzchniach asfaltowych i betonowych;
• strumień gorącego powietrza usuwa wilgoć i cząsteczki gruzu, kurzu, brudu itp.;
• gwarancja: 1 rok.