Máy phủ bột kim loại Soloan SPGF P-12

Preis: Contact us for price
Complete SOLOAN powder coating system with gas oven
powder cabin and large storage with rail system
used in 1-shift operation with a maximum of 25-30% utilization
in top condition
Soloan hand powder spray booth with suction filter system SPGF P-12
dust emission
Compressed air system
Catch overspray exhaust side
Potential equalization
Sound level
rupture disk
Less than 1 mg/m³
Pressure tank and 6 ATEX membrane valves
In container under filter cartridges
Using silencers and distribution plates
The entire facility
Maximum 75 dB(A) When cleaning with compressed air
a pulse surcharge of 10 dB(A) must be added for a short time
AISI 304 Placed at inlet supports
Exhaust channels and accessories for the suction wall
Blow-back channel Ø 630 x 1500
perforated
Soloan 38/160P gas-fired powder curing oven
Soloan high temperature curing ovens are built from rock wool insulated steel panels with a thickness of 150mm
These panels are assembled using profiles and processed in such a way that a very high insulation value is created. A double sliding door is mounted on the front
A fan burner is mounted on a chrome steel changer
which indirectly heats the oven air. A centrifugal fan distributes the heated air and blows it in through grilles on the underside of the walls
The same fan sucks this air back over the furnace roof. The result is an even air and heat distribution
The devices are placed on top of the furnace roof
An exhaust air duct (puff-off) with a
control valve is installed on the pressure side in order to create a low negative pressure in the oven and at the same time to renew the oven contents approximately ten times per hour. The outside of this oven is sendzimir galvanized with gray construction
* Switch cabinet
A control cabinet with temperature adjustment and timer with horn ensures easy operation
capacity capacity engine
Temperature range Circulation fan
Smoke removal Burner air
exhaust duct
150kW
6,000 m3/h/ 250 PA
3 kW/400 volts
220°C
Radial
Double-walled Ø 250
including roof duct and Trega cap
Fresh air intake Ø 200
incl. Roof duct and cross cap
Double-walled Ø 250
including control valve
roof duct and Trega cap
The cassette trolley is 5000mm wide and 2000mm long
A maximum of 3 traverses may be inserted into the cassette trolley at the same time. A loaded cassette trolley can carry a maximum load of 900 kg
The cassette trolley hangs on 2 rails under a steel structure
with 4 double steel wheels. At each cassette trolley position
all buffer extension openings are secured against extension. Of course
the cassette cart itself is also secured
The cassette trolley is locked in the continuous conveyor path to the transfer point
Find more here
hiện liên lạc
Contact us at
hiện liên lạc